802 research outputs found
Experimental assessment of bi-directional transmission distribution functions using digital imaging techniques
Many daylighting applications require a precise knowledge of the directional transmission features of advanced fenestration materials. These photometric properties are described by a bi-directional transmission distribution function (BTDF), whose experimental assessment requires an appropriate equipment. A novel bi-directional photogoniometer, based on digital imaging techniques, has been designed and developed for that purpose. The main advantages of this device are the significant reduction of the time required for data measurement and its capability to assess an almost continuous BTDF function. These features can be achieved only through detailed and accurate calibration procedures of the bi-directional photogoniometer, which are described in this paper, together with digital image and data processing. Several experimental results, obtained for different fenestration materials, are used to illustrate the capabilities of this novel equipment
Joint inversion of surface waves and teleseismic body waves across the Tibetan collision zone: The fate of subducted Indian lithosphere
We carry out a joint inversion of surface wave dispersion curves and teleseismic shear wave arrival times across the Tibetan collision zone, from just south of the Himalaya to the Qaidam Basin at the northeastern margin of the plateau, and from the surface to 600 km depth. The surface wave data consist of Rayleigh-wave group dispersion curves, mainly in the period range from 10 to 70 s, with a maximum of 2877 source–receiver pairs. The body wave data consist of more than 8000 S-wave arrival times recorded from 356 telesesmic events. The tomographic images show a ‘wedge’ of fast seismic velocities beneath central Tibet that starts underneath the Himalaya and reaches as far as the Bangong–Nujiang Suture (BNS). In our preferred interpretation, in central Tibet the Indian lithosphere underthrusts the plateau to approximately the BNS, and then subducts steeply. Further east, Indian lithosphere appears to be subducting at an angle of ∼45°. We see fast seismic velocities under much of the plateau, as far as the BNS in central Tibet, and as far as the Xiangshuihe-Xiaojiang Fault in the east. At 150 km depth, the fast region is broken by an area ∼300 km wide that stretches from the northern edge of central Tibet southeastwards as far as the Himalaya. We suggest that this gap, which has been observed previously by other investigators, represents the northernmost edge of the Indian lithosphere, and is a consequence of the steepening of the subduction zone from central to eastern Tibet. This also implies that the fast velocities in the northeast have a different origin, and are likely to be caused by lithospheric thickening or small-scale subduction of Asian lithosphere. Slow velocities observed to the south of the Qaidam suggest that the basin is not subducting. Finally, we interpret fast velocities below 400 km as subducted material from an earlier stage of the collision that has stalled in the transition zone. Its position to the south of the present subduction is likely to be due to the relative motion of India to the northeast.Our study has included data from GSN (including IC, IU and II), China Digital Seismograph Network, GEOSCOPE, IRIS-IDA, Pacific-21, Kyrgyz Digital Network, Kyrgyz Seismic Telemetry Network and IRIS-USGS permanent seismic networks and the MANAS, Tien Shan Continental Dynamics, Tibetan Plateau Broadband Experiment, INDEPTH II, INDEPTH III, INDEPTH IV/ASCENT, HIMNT, Bhutan, Nanga Parbat Pakistan and GHENGIS PASSCAL temporary seismic deployments. We thank IIEES and LGIT for seismic data from Iran and also SEISUK for provision and assistance with instruments operated in northeast India. CN was supported by a Natural Environment Research Council studentship (grant NE/H52449X/1), with CASE funding from AWE Blacknest. We thank Nick Rawlinson and an anonymous reviewer for their constructive and helpful reviews. Figures were prepared with Generic Mapping Tools (GMT) software (Wessel & Smith 1998).This is the version of record, which can also be found on the publisher's website at: http://gji.oxfordjournals.org/content/198/3/1526.full © The Authors 2014. Published by Oxford University Press on behalf of The Royal Astronomical Societ
Bi-directional Photogoniometer for the Assessment of the Luminous Properties of Fenestration Systems
Most energy saving applications of advanced fenestration systems (solar blinds, novel types of glazing and daylight redirecting devices) require a precise knowledge of their directional light transmission features. These photometric properties can be described by a Bi-directional Transmission Distribution Function (BTDF) whose experimental assessment requires appropriate equipment. A novel bi-directional transmission photogoniometer, based on digital imaging techniques, was designed and set up for that purpose. The apparatus takes advantage of a modern video image capturing device (CCD digital camera) as well as of powerful image analysis software (pattern recognition) to considerably reduce the scanning time of a BTDF measurement, in comparison to existing devices that use a conventional approach (mobile photometer). A detailed calibration and validation procedure was used to obtain optimal experimental accuracy for the device during the assessment of BTDF data. It included a spectral, a photometric and a geometrical calibration of the digital video system, as well as several additional corrections, leading to an overall relative accuracy better than 11% for BTDF data. A special effort was made to improve the user-friendliness of BTDF measurement by facilitating the data acquisition and treatment (definition of a data acquisition and electronic data format) and by offering different possibilities of BTDF visualisation (hemispherical representation, axonometric view of photometric solids, C-planes). Overall, the photometric equipment was used to assess the BTDFs of more than 20 novel fenestration products of the industrial partner of the project (Baumann-Hüppe Storen AG). The experimental data produced was successfully used by the company to optimise the visual and energy saving performance of their products, which confirms the adequacy of the novel bi-directional photogoniometer for practical building applications
Innovative bidirectional video-goniophotometer combining transmission and reflection measurements
To assess the daylighting performances of a building, one of the most commonly used quantities is the Daylight factor, which is defined for a given surface element inside the analysed room as the ratio of the inside and outside illuminances under a CIE overcast sky. The Daylight factor consists of three components: the sky component, due to light flux reaching the surface element directly from the sky, the externally and the internally reflected components, respectively due to light flux reflected on external and internal surfaces. To estimate the direct sky component (also called sky factor), analytical methods can be used, based on the luminance distribution of the sky and the window’s geometric properties (dimensions and position in regard to the considered surface element). However, such methods have always been restricted to vertical (lateral) and horizontal (zenithal) windows, requiring heavy approximations to be applied whenever a tilted rectangular opening was considered. In this paper, a generalized method for assessing the sky component is proposed, extending it to rectangular windows of any tilt angle. As a purely analytical approach was found to be inapplicable, it is based on an optimised combination of vertical and horizontal windows situations. To validate the developed methodology, scale model measurements were performed with a sky simulator for two rectangular openings of varying tilt angle (every 15° from vertical to horizontal): the experimental results proved to be in very good agreement with the calculation-based approach
Recommended from our members
Imaging the lithosphere beneath NE Tibet: Teleseismic P and S body wave tomography incorporating surface wave starting models
The northeastern margin of the Tibetan Plateau, which includes the Qiangtang and Songpan-Ganzi terranes as well as the Kunlun Shan and the Qaidam Basin, continues to deform in response to the ongoing India–Eurasia collision. To test competing hypotheses concerning the mechanisms for this deformation, we assembled a high-quality data set of approximately 14 000 P- and 4000 S-wave arrival times from earthquakes at teleseismic distances from the International Deep Profiling of Tibet and the Himalaya, Phase IV broad-band seismometer deployments. We analyse these arrival times to determine tomographic images of P- and S-wave velocities in the upper mantle beneath this part of the plateau. To account for the effects of major heterogeneity in crustal and uppermost mantle wave velocities in Tibet, we use recent surface wave models to construct a starting model for our teleseismic body wave inversion. We compare the results from our model with those from simpler starting models, and find that while the reduction in residuals and results for deep structure are similar between models, the results for shallow structure are different. Checkerboard tests indicate that features of ~125km length scale are reliably imaged throughout the study region. Using synthetic tests, we show that the best recovery is below ~300km, and that broad variations in shallow structure can also be recovered. We also find that significant smearing can occur, especially at the edges of the model. We observe a shallow dipping seismically fast structure at depths of ~140–240km, which dies out gradually between 33°N and 35°N. Based on the lateral continuity of this structure (from the surface waves) we interpret it as Indian lithosphere. Alternatively, the entire area could be thickened by pure shear, or the northern part could be an underthrust Lhasa Terrane lithospheric slab with only the southern part from India. We see a deep fast wave velocity anomaly (below 300?km), that is consistent with receiver function observations of a thickened transition zone and could be a fragment of oceanic lithosphere. In NE Tibet, it appears to be disconnected from faster wave velocities above (i.e. it is not downwelling or subducting here). Our models corroborate results of previous work which imaged a relatively slow wave velocity region below the Kunlun Shan and northern Songpan-Ganzi Terrane, which is difficult to reconcile with the hypothesis of southward-directed continental subduction at the northern margin. Wave velocities in the shallow mantle beneath the Qaidam Basin are faster than normal, and more so in the east than the west.This work was supported by a Natural Environment Research Council studentship
(grant NE/H52449X/1)This version of record of this article can be found in Geophysical Journal International (March, 2014) 196 (3): 1724-1741. doi: 10.1093/gji/ggt47
Effect of oxygen plasma etching on graphene studied with Raman spectroscopy and electronic transport
We report a study of graphene and graphene field effect devices after
exposure to a series of short pulses of oxygen plasma. We present data from
Raman spectroscopy, back-gated field-effect and magneto-transport measurements.
The intensity ratio between Raman "D" and "G" peaks, I(D)/I(G) (commonly used
to characterize disorder in graphene) is observed to increase approximately
linearly with the number (N(e)) of plasma etching pulses initially, but then
decreases at higher Ne. We also discuss implications of our data for extracting
graphene crystalline domain sizes from I(D)/I(G). At the highest Ne measured,
the "2D" peak is found to be nearly suppressed while the "D" peak is still
prominent. Electronic transport measurements in plasma-etched graphene show an
up-shifting of the Dirac point, indicating hole doping. We also characterize
mobility, quantum Hall states, weak localization and various scattering lengths
in a moderately etched sample. Our findings are valuable for understanding the
effects of plasma etching on graphene and the physics of disordered graphene
through artificially generated defects.Comment: 10 pages, 5 figure
Measurement of bi-directional photometric properties of advanced glazing based on digital imaging techniques
Many daylighting applications require a precise knowledge of the transmission properties of fenestration materials, called bi-directional transmission distribution functions (BTDF), which necessitate systematic and accurate measurements. A new type of bi-directional photogoniometer, based on advanced imaging techniques, has been developed to this end; its mechanical concept, the calibration procedures and the first results are presented here
Photogoniomètre bidirectionnel pour l’évaluation des performances lumineuses de systèmes de fenêtres
Les applications en lumière naturelle exigent une connaissance objective et systématique des propriétés de transmission lumineuse des systèmes de fenêtres. Ces caractéristiques photométriques sont décrites par une fonction de distribution bidirectionnelle de transmission (BTDF), dont l‘évaluation expérimentale nécessite un équipement approprié. Un nouveau type de photogoniomètre bidirectionnel, basé sur des techniques d’imagerie numérique, a été développé dans ce but. Ses principaux avantages résident dans la réduction significative du temps de mesure et dans la possibilité de déterminer une fonction BTDF quasi continue. Ces résultats ne peuvent être atteints que grâce à des procédures de calibrage spécifiques et précises du photogoniomètre bidirectionnel, présentées dans cet article, avec un traitement approprié des images et des données
- …